AOK-250 plus

Container range

Usage: Drugs, cosmetics, health products, alcohol, food, cosmetics, oils, soy sauce, mineral water, carbonated beverages, pesticides, and industrial products, etc.

Material: PET, PETG, PP, HDPE, PC, PES, COP, PPSU, Tritan etc.

Shape: Circular, non circular, fan-shaped, wide mouthed, thick walled, ultra light, bottle with handle, etc.

Rapid cooling technology - is a molding technology for PET containers, especially for thick bottomed bottles, which have a more significant effect.

The cooling time at the injection molding station is set to zero, and the cooling work is set to 2 station , which greatly shortens the molding cycle.

It is also possible to design better stretching ratios, and this rapid cooling molding process has improved the quality of bottles, with the following improvements.

* Tensile strength

* Stiffness

* Gas barrier

* Impact resistance

* Creepage resistance

* Thick wall distribution control and stability

A small 1 step blow molding machine that combines all the advantages of energy conservation, versatility, and low noise.

AOK series main function

Energy saving servo pump

The oil pump uses a servo motor, which is characterized by being pneumatic only in case of demand, and controlling the speed and pressure of hydraulic oil through the oil pump.

Advantages of using servo motor oil pump:

* Energy saving - When the servo motor is not in action, it is in a standstill state. The injection and locking modes are independent servo pumps, and each pump is operated independently,The actual load ratio is about 20% of the actual load (average). Save 40% electricity compared to older models of non servo pump equipment.

* High precision - The torque of the servo motor can be freely controlled.

* Shorten the cycle - actions can be synchronized.

* Low noise - optimized production environment, idle equipment is about 45.3 decibels (20% lower than 12N).

* Low consumption - Low water and electricity consumption.

* Reduce production costs - due to low consumption.

* Reduce heat dissipation - servo motors have a lower heat dissipation rate.

* Reduce investment - electric picks, cold water towers, hydraulic oil.

* Improve mold life - improve mold locking force control.