第二代TEC BLOW吹瓶机显著的技术优势和创新理念尽显于设备的各项关键功能中。第二代TEC BLOW吹瓶机操作简单灵活，生产连续无间断，占地面积小，产能高，加热能耗和耗气量节省可观。这些特点再次验证了设备完全可以满足客户高要求，并奠定了第二代TEC BLOW技术领先地位。
| 型号 | 单位 | RL-8 | |
| 成型组规格 | 模穴数 | Cavities | 8 |
| 模具行程 | mm | 0-130 | |
| 拉杆行程 | mm | 340 | |
| 底模运动行程 | mm | 50 | |
| 瓶子间距 | mm | 114.3 | |
| 加热间距 | mm | 38.1 | |
| 胚头数 | Pcs | 178 | |
| 瓶型规格 | 瓶子最大容量 | ltr | 1.5 |
| 牙部尺寸（外径） | mm | 30/38 | |
| 最大瓶胚高度 | mm | 120 | |
| 最大瓶身直径 | mm | 95 | |
| 最大瓶身高度 | mm | 320 | |
| 理论产能 | B.P.H | 12000 | |
| 电控規格 | 加热箱数量 | Units | 8 |
| 灯管道数量 | 层 | 10 | |
| 灯管数量 | Pcs | 80 | |
| 最大加热配置功率 | kw | 96 | |
| 加热实际功率0.5L/15g | kw | 38 | |
| 电力总容量 | kw | 108 | |
| 电压 | V | 220v/380V/3phase | |
| 空压规格 | 操作压力 | kg/cm² | 7 |
| 吹瓶压力 | Mpa | 3.8 | |
| 高压空气耗氧量 | L/min | 12000 | |
| 冷却水规格 | 温度范围 | ℃ | 10-15 |
| 压力 | Mpa | 0.4 | |
| 流量 | L/min | 80 | |
| 额定功率 | HP | 5 | |
| 机台规格 | 主机尺寸（L*W*H） | M | 7.2*2.0*2.5 |
| 机台重量 | Kg | 10000 | |
| Components | Brand-Origin | Model |
| PLC | Inovance, China | H5U-1614MTD-A16 |
| Touch screen | Inovance, China | IT7150E |
| Input 16 Module | Inovance, China | GL10-1600END |
| Output 16 Module | Inovance, China | GL10-0016ETN |
| Remote 16 Input output Module | Inovance, China | GR10-1615ETNE |
| Remote 8 Input output Module | Inovance, China | GR10-0808ETNE |
| Frequency 1 | Inovance, China | MD310T 0.7B |
| Frequency 2 | Inovance, China | MD310T 2.2B |
| Servo drive for oven move and preform lift | Inovance, China | MS1H3-18C15CD-A331Z |
| Servo motor for oven move and preform lift | Inovance, China | SV660NT8R4I |
| Servo drive for Preform in and bottle in | Inovance, China | MS1H3-13C15CD-A331Z |
| Servo motor for Preform in and bottle in | Inovance, China | SV660NT5R4I |
| Servo drive for mold clamping | Inovance, China | MS1H3-44C15CD-A331Z |
| Servo motor for mold clamping | Inovance, China | SV660NT017I |
| Servo drive for stretching | Inovance, China | MS1H3-44C15CD-A334Z |
| Servo motor for stretching | Inovance, China | SV660NT017I |
| Servo drive for sidesway | Inovance, China | MS1H2-4C30CD-A331Z |
| Servo motor for sidesway | Inovance, China | SV660NT017I |
| Pre-blow regulator valve | Ewo, German | ST 0240 001 1F5 |
| Silencer | Smc, Japan | VCHN4-10 |
| Air clean and filter | Smc, Japan | AW40-04DG-2-B |
| Stabilize valve | Parker, USA | 321H32-24V |
| Contactor | Schneider, German | LC1-D65AM7C NSC160S3160N |
| Relay | Schneider, German | RM22-TG20 LR-D10C |
| SCR | Watt, China | TH-1-4-060-P |
| High pressure blowing valve 3 in 1 | Norgren, England | AVSP-L-3V00 |
| Preform blowing check sensor | Keyence, Japan | PZ-G62N+OP-84219 |
| Proximate sensor 1 | Autonics, Korea | PRDL12-4DN |
| Proximate sensor 2 | Sick, German | IME12-04BNSZC0S |
| Heating lamps | Haichuan, China | 378mm*2000w*380v |
| Heating reflection board | Ceramic | |
| Sealing cylinder | Lokwah, China | NTB63*38C |