Usage: Drugs, cosmetics, health products, alcohol, food, cosmetics, oils, soy sauce, mineral water, carbonated beverages, pesticides, and industrial products, etc.
Material: PET, PETG, PP, HDPE, PC, PES, COP, PPSU, Tritan etc.
Shape: Circular, non circular, fan-shaped, wide mouthed, thick walled, ultra light, bottle with handle, etc.
* Tensile strength
* Stiffness
* Gas barrier
* Impact resistance
* Creepage resistance
* Thick wall distribution control and stability
Energy saving servo pump
The oil pump uses a servo motor, which is characterized by being pneumatic only in case of demand, and controlling the speed and pressure of hydraulic oil through the oil pump.
* Energy saving - When the servo motor is not in action, it is in a standstill state. The injection and locking modes are independent servo pumps, and each pump is operated independently,The actual load ratio is about 20% of the actual load (average). Save 40% electricity compared to older models of non servo pump equipment.
* High precision - The torque of the servo motor can be freely controlled.
* Shorten the cycle - actions can be synchronized.
* Low noise - optimized production environment, idle equipment is about 45.3 decibels (20% lower than 12N).
* Low consumption - Low water and electricity consumption.
* Reduce production costs - due to low consumption.
* Reduce heat dissipation - servo motors have a lower heat dissipation rate.
* Reduce investment - electric picks, cold water towers, hydraulic oil.
* Improve mold life - improve mold locking force control.
| No | Name | Brand | Re |
| 1 | Servo motor | Inovance | China |
| 2 | Drive | Inovance | China |
| 3 | Servo pump | SUMITOMO | Japan |
| 4 | Servo motor for rotary plate | Inovance | China |
| 5 | Speed reducer | LIMING | Taiwan |
| 6 | Panel+Computer | Inovance | China |
| 7 | Displacement sensor | OPKON | Turkey |
| 8 | Hydraulic solenoid valve | KEIKI | Japan |
| 9 | Low pressure valve | SMC | Japan |
| 10 | High pressure valve | NORGEN | Britain |
| 11 | Cylinder | SMC | Japan |
| 12 | Stainless/Metallic Screw | 华博 | China |
| 13 | Contactor | Schneider | France |
| 14 | Breaker | Schneider | France |
| 15 | Proximate sensor | Autonics | South Korea |
| 16 | Magnetic sensor | SMC | Japan |
| Name | AOK-12W V3 | |||||||
| Model | Unit | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| （E）Mouth | mm | 62 | 48 | 38 | 32 | 25 | 17 | 15 |
| （D）Container diameter | mm | 100 | 83 | 70 | 55 | 44 | 29 | 27 |
| （D）Container height | mm | 300 | 300 | 300 | 200 | 200 | 150 | 150 |
| （V）Container volume | ml | 1500 | 900 | 400 | 250 | 100 | 30 | 20 |
| Name | Model | Unit | |
| Injection unit | |||
| Model | AOK-12W V3 | ||
| Screw diameter | Φ38 | mm | |
| Shot Volume | 170 | cm3 | |
| Injection pressure | 230 | MPa | |
| Injection Stroke | 150 | mm | |
| Screw speed | 0-200 | r/min | |
| Injection mold clamp station | |||
| Clamping force inj.core | 107 | KN | |
| Clamping force lip mold | 107 | KN | |
| Clamping stroke inj.core | 250 | mm | |
| Clamping stroke lip mold | 200 | mm | |
| Conditioning station | |||
| Up conditioning core stroke | 250 | mm | |
| Up conditioning core cylinder | 2.5 | KN | |
| Down conditioning pot stroke | 150 | mm | |
| Down conditioning pot cylinder | 1.54 | KN | |
| Stretch blow mold clamp station | |||
| Stretch force | 2.50 | KN | |
| Stretch stroke | 150 | mm | |
| Blow mold clamping force | 107 | KN | |
| Blow mold min. thickness | 160 | mm | |
| Blow mold max. Open stroke | 110 | mm | |
| Blow mold platen size | 290x290+ | mm | |
| Bottle eject station | |||
| Ejector Number | 150 | mm | |
| Ejector Force | 2.50 | KN | |
| Hydraulic system | |||
| System pressure | 17，5 | MPa | |
| Oil Tank Capacity | 300 | L | |
| Pump 1 flow | 126 | L/min | |
| Pump 2 flow | 126 | L/min | |
| Pump 3 flow | 160 | L/min | |
| Pneumatic system | |||
| Blowing air pressure | 3.0 | MPa | |
| Machine operating air pressure | 0，80 | MPa | |
| Blowing air piping volume | 2，7 | *2*4 | L/shot |
| Machine operating air volume | 10，0 | *3 | L/shot |
| Electric system | |||
| Servo motor-pump1 | 22 | Kw | |
| Servo motor-pump2 | 27 | Kw | |
| Servo motor-filter unit | 3 | Kw | |
| Heating capacity-barrel | 9 | Kw | |
| Heating capacity-mold | 4.0 | Kw | |
| Control circuit load | 0.75 | Kw | |
| Control circuit voltage | 24 | VDC | |
| Total power | 65 | Kw | |
| 15 | Kw | ||
| Water system | |||
| Cooling tower water | 55 | L/min | |
| Cooling tower water pressure | 0.3-0.6 | MPa | |
| Chiller water | 60 | L/min | |
| Consistency of water temperature | ±1 | ℃ | |
| Chiller water pressure | 0.3-0.6 | MPa | |
| Machine size, mass | |||
| Machine size | 4500x1200x3100 | mm | |
| Floor space | 4500x1200 | mm | |
| Machine Weight | 9000 | kg | |