6 Cavity TEC BLOW RL-6

Go back

Equipment introduction

The second generation TEC BLOW significant technology and innovation applied in the key part of blowing machines. Its convenient operation, nonstop production, less room, high capacity, less heating power and air consumption all meets customer requirement. TEC BLOW becomes the leading technology in plastic machinery field.

Technical Specification

Model Unit RL-6II
Clamping System Number of cavity Cavities 6
Mold stroke mm 0-130
Stretch stroke mm 340
Bottom stroke mm 50
Cavity distance mm 114.3
Heating distance mm 44.48
Number of holder Pcs 134
Container Max.container volume ltr 2
Max. neck diameter (optional) mm 30
Max.prefrom height mm 120
Max.container diameter mm 95
Max.container height mm 320
Theoretical Output B.P.H 12000
Electrical System Heating oven Units 5
Box*channel Storey 12
Number of lamp Pcs 60
Heating power kw 120
Average power kw 20
Installed power kw 130
Voltage V 220v/380V/3phase
Air System Operating pressure kg/cm² 10
Blowing pressure Mpa 2.5-3.5
High pressure air consuming L/min 6000
Chiller System Temperature ℃ 10-15
Pressure Mpa 0.4
Flow rate L/min 80
Heating power HP 5
Machine Machine dimension (L*W*H) m 5.8*2.0*2.5
Machine weight Kg 7000

Machine component list

Components Brand, Country
PLC Mitsubishi, Japan
Touch screen Mitsubishi, Japan
Input 16 Module Mitsubishi, Japan
Output 16 Module Mitsubishi, Japan
Remote 16 Input output Module Mitsubishi, Japan
Remote 8 Input output Module Mitsubishi, Japan
Frequency 1 Mitsubishi, Japan
Frequency 2 Mitsubishi, Japan
Servo drive for oven move and preform lift Mitsubishi, Japan
Servo motor for oven move and preform lift Mitsubishi, Japan
Servo drive for Preform in and bottle in Mitsubishi, Japan
Servo motor for Preform in and bottle in Mitsubishi, Japan
Servo drive for mold clamping Mitsubishi, Japan
Servo motor for mold clamping Mitsubishi, Japan
Servo drive for stretching Mitsubishi, Japan
Servo motor for stretching Mitsubishi, Japan
Servo drive for sidesway Mitsubishi, Japan
Servo motor for sidesway Mitsubishi, Japan
Pre-blow regulator valve Ewo, German
Silencer Smc, Japan
Air clean and filter Smc, Japan
Stabilizer valve Parker, USA
Contactor Schneider, German
Relay Schneider, German
SCR Watt, China
High pressure blowing valve 3 in 1 Norgren, England
Preform blowing check sensor Keyence, Japan
Proximate sensor 1 Autonics, Korea
Proximate sensor 2 Sick, German
Heating lamps Haichuan, China
Heating reflection board
Sealing cylinder Lokwah, China