TEC BLOW RL-2-10L

Go back

Equipment introduction

The second generation TEC BLOW significant technology and innovation applied in the key part of blowing machines. Its convenient operation, nonstop production, less room, high capacity, less heating power and air consumption all meets customer requirement. TEC BLOW becomes the leading technology in plastic machinery field.

Structure diagram

Technical Specification

Model Unit TEC BLOW RL-2 10L
Clamping System Number of cavity Cavities 2
Mold stroke mm 2-200
Stretch stroke mm 360
Bottom stroke mm 50
Cavity pitch mm 203.2
Heating pitch mm 76.2
Number of holder Pcs 74
Container Max.container volume ltr 10
Max.neck diameter mm 48
Max.prefrom height mm 180
Max.container diameter mm 195
Max.container height mm 450
Theoretical Output B.P.H 1200
Electrical System Heating oven Units 5
Box*channel Storey 12
Number of lamp Pcs 60
Heating power kw 72
Average power kw 35
Installed power kw 80
Voltage V 220v/380V/3phase
Air System Operating pressure kg/cm² 8-10
Blowing pressure Mpa 3.5
High pressure air consuming L/min 4000
Chiller System Temperature ℃ 10-15
Pressure Mpa 0.4
Flow rate L/min 80
Heating power HP 5
Machine Machine dimension (L*W*H) m 3.3*2.7*2.5
Machine weight Kg 6500

Machine component list

Components Brand, Country
PLC Mitsubish, Japan / Inovance, China
Touch screen Mitsubish, Japan / Inovance, China
Input 16 Module Mitsubish, Japan / Inovance, China
Output 16 Module Mitsubish, Japan / Inovance, China
Remote 16 Input output Module Mitsubish, Japan / Inovance, China
Remote 8 Input output Module Mitsubish, Japan / Inovance, China
Frequency 1 Mitsubish, Japan / Inovance, China
Frequency 2 Mitsubish, Japan / Inovance, China
Servo drive for oven move and preform lift Mitsubish, Japan / Inovance, China
Servo motor for oven move and preform lift Mitsubish, Japan / Inovance, China
Servo drive for Preform in and bottle in Mitsubish, Japan / Inovance, China
Servo motor for Preform in and bottle in Mitsubish, Japan / Inovance, China
Servo drive for mold clamping Mitsubish, Japan / Inovance, China
Servo motor for mold clamping Mitsubish, Japan / Inovance, China
Servo drive for stretching Mitsubish, Japan / Inovance, China
Servo motor for stretching Mitsubish, Japan / Inovance, China
Servo drive for sidesway Mitsubish, Japan / Inovance, China
Servo motor for sidesway Mitsubish, Japan / Inovance, China
Pre-blow regulator valve Ewo, German
Silencer Smc, Japan
Air clean and filter Smc, Japan
Stabilize valve Parker, USA
Contactor Schneider, German
Relay Schneider, German
SCR Watt, China
High pressure blowing valve 3 in 1 Norgren, England
Preform blowing check sensor Keyence, Japan
Proximate sensor 1 Autonics, Korea
Proximate sensor 2 Sick, German
Heating lamps Haichuan, China
Heating reflection board
Sealing cylinder Lokwah, China